PC IІ/B-К(S-V)-400R-N
CEM II/B-M(S-L) 32,5 R
Portland-slag cement.
Meets all the requirements of the national quality standards DSTU B V.2.7-46: 2010.
Composition
- 65-79% of Portland cement clinker
- 21-35% of granulated blast furnace slag
Produced from ordinary clinker in which tricalcium aluminate content does not exceed 8%.
Features of application
- architectural elements made of concrete
- foundations
- monolithic structures
Main properties
- Low heat of hydration, which enables working with concrete in the heat
- High steam curing efficiency
- Used for concretes with the strength class up to B35
- Improved resistance to efflorescence
- Improved workability
- Compatible with most chemical additives of various process purposes
Storage
The cement should be transported and stored in closed vehicles and containers to avoid exposure to moisture and contamination by impurities. The manufacturer guarantees that the cement will meet the requirements of the standards for at least 45 days if the rules of transportation and storage are followed.
Safety requirements
Wear appropriate personal protective equipment while working with cement. Cement can irritate the eyes, respiratory system and skin. Avoid contact with skin and eyes. In case of contact with the eyes, rinse immediately with plenty of water and seek medical advice. Upon contact with skin, rinse immediately with plenty of water. Cement should be stored out of the reach of children.
Technical support
The CEMARK Concrete Laboratory Engineers provide comprehensive technical support in terms of the quality performance of cement in concrete and its application by your specifications.