PC І-500R-N
CEM I 42,5 R
Portland cement with rapid gain in early strength without active mineral additives.
Meets all the requirements of the national quality standards DSTU B V.2.7-46: 2010.
Composition
- 95-100% of portland cement clinker
Produced from ordinary clinker in which tricalcium aluminate content does not exceed 8%.
Features of application
- road and airfield construction
- foundation slabs, walls, columns, ceiling slabs, arches and vaults
- bridge structures, tunnels
- production of shotcrete, autoclaved aerated concrete and foam concrete
- pipes for pressure networks
- work in low temperatures
Main properties
- A high heat of hydration due to its high activity enables working with concrete in the cold season
- Increased resistance to freeze-thaw cycles
- Used for concretes with the strength class of B20 and above
- Compatible with most chemical additives of various process purposes
Storage
The cement should be transported and stored in closed vehicles and containers to avoid exposure to moisture and contamination by impurities. The manufacturer guarantees that the cement will meet the requirements of the standards for at least 45 days if the rules of transportation and storage are followed.
Safety requirements
Wear appropriate personal protective equipment while working with cement. Cement can irritate the eyes, respiratory system and skin. Avoid contact with skin and eyes. In case of contact with the eyes, rinse immediately with plenty of water and seek medical advice. Upon contact with skin, rinse immediately with plenty of water. Cement should be stored out of the reach of children.
Technical support
The CEMARK Concrete Laboratory Engineers provide comprehensive technical support in terms of the quality performance of cement in concrete and its application by your specifications.
We provide consulting and technical support to our partners and conduct tests at all stages of concrete production.
View information about the Concrete Laboratory